2DM556 CNC Digital stepper motor drive in Lahore Pakistan | Hallroad.org.pk

2DM556 CNC Digital stepper motor drive

₨15,500

2DM556 CNC Digital stepper motor drive in Gujranwala

Specification:

  • Item Type: 2 Phase Stepper Motor Driver
  • Material: ABS, aluminum alloy
  • Input Voltage: DC 24-60V
  • Continuous Current: 5.6A
  • Control Mode: Pulse and direction
  • Number of Subdivisions: 2-256
  • Driver Model: 2DM556
  • Communication Rate: 57.6Kbps
  • Pulse Width: >2.5μs
  • Signal Amplitude: 5-24V
  • Protection:
  • Overcurrent Action Value Peak Value: 10A±10%
  • Overvoltage Voltage Action Value: DC 70V

How to Use:

  • Dip Settings:
  • Current selector switch: SW1, SW2, SW3
  • Static flow or full flow options: SW4, ON full flow, OFF half flow
  • Subdivide selector switch: SW5, SW6, SW7, SW8

The subdivision of the drive is set by the DIP switch, as shown in the table below. In addition, if the subdivision dip table cannot meet user needs, users can customize the subdivision through the debugger board. If parameter P14 is set to 4‑1000, the driver subdivision is 4 x 50‑1000 x 50. When parameter P14 is set to 0, the user defined subdivision function fails, and subdivision is set by the DIP switch.

Package List:
1 x Stepper Motor Driver

Category: Tags: , , , ,

Description

2DM556 CNC Digital stepper motor drive in Lahore Pakistan | Hallroad.org.pk

Key Features:

  • The new 32-bit DSP technology

Optically isolated differential inputs (26LS32)    Extra-low noise and vibration    The range of micro steps is 2-128    Built in 500 times high frequency micro steps    Driver 2 phase step motor with 4leads,6leads and 8leads    Current settings is optional between ratings    Pulse frequency response up to 200KHz    Overvoltage, undervoltage, short circuit protection    Alarm output function I / O ports    Specifications    <table width=”100%”

2DM556 CNC Digital stepper motor drive in Lahore Pakistan | Hallroad.org.pk

2DM556 CNC Digital stepper motor drive in Lahore Pakistan | Hallroad.org.pk

2DM556 CNC Digital stepper motor drive in pakistan BR1997.

Introduction:

2DM556 is newest digital stepper motor driver launched by JMC, using the latest 32-bit DSP control technology, the user can set any segment within 25600 and multi-range current value within rated current,with built-in micro technology,2DM556 driver greatly improved stability and reduced noise under subdivision.

 

Reviews

There are no reviews yet.

Be the first to review “2DM556 CNC Digital stepper motor drive”

Your email address will not be published. Required fields are marked *

Related products